Skip to content

add extra raid disk

조회 수 4 추천 수 0 2020.01.05 18:10:24

https://zackreed.me/adding-an-extra-disk-to-an-mdadm-array/

 

 

 

Initial State

If you remember from part one, we setup a (3) disk mdadm RAID5 array, created a filesystem on it, and set it up to automatically mount. In this part, we’ll add a disk to an existing array to first as a hot spare, then to extend the size of the array. Growing a RAID-5 array with mdadm is a fairly simple (though slow) task. First you will need to prepare the new drive in the same we we prepared the initial drives in [part 1](http://zackreed.me/articles/38-software-raid-5-in-debian-with-mdadm). To start the actual growing of the array we then add the new drive to the array as a spare:

Then we grow the array onto this device. Because I had 3 drives before, the new drive obviously makes 4. Make sure to change this to whatever number you now have! Let’s set up some options to make the array rebuild / recover faster… In this example, set it to 50000 K/Sec, enter:

As when creating the array, we can follow the progress by checking the file /proc/mdstat.

Again, I like to wait for the operation to finish before attempting to grow the filesystem, but you should be able to do it while the array syncs if you’d like. At this point, you’ve added the disk to the array, and it should show up as a hot spare like this.

Growing the array and the filesystem

Adding this new drive to the array is ridiculously easy.

As when creating the array, we can follow the progress by checking the file /proc/mdstat.

Again, I like to wait for the operation to finish before attempting to grow the filesystem, but you should be able to do it while the array syncs. Since, I err on the side of caution, I let the array finish syncing and run a filesystem check to make sure everything is in order before I grow the array. Before we can run a filesystem check, we need to unmount it:

Now that it is unmounted we can run a filesystem check to make sure everything is in order:

If any issues arise, let it attempt to fix them for you. Once the filesystem has been checked we can perform the resize. If you decided to use something other than ext2/3/4 this will be done differently, but for the ext2/3/4 filesystems we use the resize2fs tool.

This will automatically grow the filesystem to the new size of the device. But, whenever you make a change to mdadm, you always want to remember to update your mdadm.conf file so that it reassembles correctly after a reboot.

You can now remount the drive and start filling it up again!

List of Articles
번호 제목 글쓴이 날짜 조회 수
1620 xml json pascal [4] WHRIA 2020-01-12 6
1619 nvidia caffe WHRIA 2020-01-12 8
1618 retinanet nvidia [3] WHRIA 2020-01-12 7
1617 lvm [2] WHRIA 2020-01-09 5
1616 usb 3.1 + DP WHRIA 2020-01-07 4
1615 raid 6 rebuild WHRIA 2020-01-07 5
» add extra raid disk WHRIA 2020-01-05 4
1613 참고 또 참고 WHRIA 2020-01-03 12
1612 R graph WHRIA 2019-12-29 11
1611 melanoma awareness [1] WHRIA 2019-12-27 7
1610 윈도우 raid ahci 전환 WHRIA 2019-12-26 4
1609 lvm 확장 [1] WHRIA 2019-12-25 10
1608 pytorch object detect / retinanet WHRIA 2019-12-22 13
1607 kaggle leakage WHRIA 2019-12-19 5
1606 pytorch - caffe WHRIA 2019-12-19 4

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소